Defender 90 Headlining Replacement Guide

Defender 90 Headlining Replacement – Step-by-Step Guide

Replacing the headlining in your Defender 90 can transform the interior of your vehicle, keeping it looking clean and professional. Over time, the headlining fabric can sag, tear, or discolor, affecting your driving experience. This guide will walk you through the process, ensuring a smooth, DIY-friendly replacement.

Tools & Materials Needed

To successfully replace your Defender 90 headlining, gather the following:

  • Replacement headlining fabric

  • Spray adhesive or suitable glue

  • OR A Defender Headlinings complete headlining ready to fit.

  • Trim removal tools

  • Screwdrivers and clips for panels

  • Clean cloths for prepping surfaces

Step-by-Step Replacement Guide

  1. Remove Trim Panels – Carefully remove all interior trim that secures the headlining.

  2. Take Down Old Headlining – Peel off the old fabric and inspect the underlying board for damage.

  3. Prepare the Surface – Clean the surface thoroughly to ensure proper adhesion of the new headlining.

  4. Apply New Headlining – Spray adhesive evenly and attach the new fabric, smoothing out wrinkles.

  5. Reinstall Trim – Carefully replace all trim panels to secure the new headlining in place.

Tips & Tricks

  • Apply adhesive evenly to prevent sagging.

  • Work in sections to avoid bubbles and wrinkles.

  • Use high-quality replacement fabric for durability.

Conclusion:
Following these steps, your Defender 90 interior will look refreshed and professional. With patience and attention to detail, this DIY headlining replacement is achievable for any enthusiast.

SEO Keywords: Defender 90 headlining replacement, replace Defender 90 headlining, Defender 90 DIY headlining

Back to blog